Work Gloves
Grainger Cut-Off TKF 12L050NB20DR KW10 10 pcs.
The Grainger 170EW7 is a Westinghouse 7.5 HP, 230/460V, 1725 RPM, 3 Phase, TEFC Electric Motor. It features a cast iron frame, thermally protected, 1.15 service factor, and standard foot mounting. This electric motor is suitable for industrial applications requiring reliable 3 phase power.
Grainger Cut-Off GDM 3020N003PF PR1225 10 pcs.
The Grainger 170FN7 is a 1/4 HP, 115V, 60Hz, 1 phase, 3450 RPM, 56C frame, open drip proof, continuous duty, C-face motor. It has a 48Y frame with a 1.25" shaft diameter and 1.38" shaft height. The motor is thermally protected and rated for indoor use. It has ball bearings and measures approximately 9-1/2" in length by 5-3/4" in width by 6-7/8" in height. The motor weighs approximately 18 pounds.
Grainger Cut-Off TKF 12R050S KW10 U 10 pcs.
The 170EW4 is a Dayton 1/3 HP, 115/230V AC, 1725 RPM, 56C Frame, Open Drip Proof Fan Motor with a 1.15 Service Factor from Grainger. It features sleeve bearings and is totally enclosed for protection against dirt, dust, water and other contaminants. This single phase motor can be wired for 115V or 230V operation. It has Class B insulation and a NEMA 48Y frame. The 170EW4 would be a good choice for industrial ventilation, cooling, fume exhaust or material handling applications.
Essendant GLOVESFUL CTD NITR JRSY
Full nitrile coating lets these gloves handle your toughest tasks Resists cuts abrasions punctures and snags Cotton jersey lining provides maximum wearer comfort even at low working temperatures Actifresh treatment reduces odors and promotes hygiene Launderable gloves are long-lasting and durable ANSI Cut Resistance- A3 ANSI Abrasion Resistance- Level 6 ANSI Puncture Resistance- Level 3 Anti-Vibration- No
Grainger Cut-Off GDM 1516N003PF PR1535 10 pcs.
The Grainger 170FR4 is a 4-ton floor jack with a lifting range of 5-1/4 to 18-1/4 inches. It has a steel frame and saddle and uses a hydraulic lifting mechanism to raise loads up to 8,000 lbs. This heavy duty jack has swivel casters for easy maneuverability. It meets ASME PALD standards and comes with a one year warranty from Grainger. The floor jack weighs 85 lbs and measures 28-1/2 x 12-1/4 x 6-3/4 inches.
MSC HYFLEX 3/4 DIP C/R GLV
Series 11-537 Cut, Puncture & Abrasive-Resistant Gloves: Size S, ANSI Cut A2, ANSI Puncture 4, Silicone-Free Nitrile, Synthetic
MSC HYFLEX 3/4 DIP C/R GLV
Series 11-537 Cut, Puncture & Abrasive-Resistant Gloves: Size L, ANSI Cut A2, ANSI Puncture 4, Silicone-Free Nitrile, Synthetic
MSC HYFLEX 3/4 DIP C/R GLV
Series 11-537 Cut, Puncture & Abrasive-Resistant Gloves: Size S, ANSI Cut A2, ANSI Puncture 4, Silicone-Free Nitrile, Synthetic
MSC HYFLEX 3/4 DIP C/R GLV
Series 11-537 Cut, Puncture & Abrasive-Resistant Gloves: Size XS, ANSI Cut A2, ANSI Puncture 4, Silicone-Free Nitrile, Synthetic
MSC HYFLEX 3/4 DIP C/R GLV
Series 11-537 Cut, Puncture & Abrasive-Resistant Gloves: Size XL, ANSI Cut A2, ANSI Puncture 4, Silicone-Free Nitrile, Synthetic
MSC VANTAGE MED WT GLV
Series 70-761 Puncture-Resistant Gloves: Size Small, ANSI Cut N/A, Series 70-761
MSC HYFLEX PALM DIP C/R GLV
Cut-Resistant Gloves: Size X-Large, ANSI Cut A4, Foam Nitrile, Series 11-541
MSC EDGE POLY/HPPE C/R GLV
Cut & Puncture Resistant Gloves; Style: Knit ; Coating Material: Polyurethane ; Coating Coverage: Palm ; Glove Type: Cut, Puncture & Abrasion-Resistant ; ANSI/ISEA Cut Resistance Level: A6 ; Primary Material: Polyester; Fiberglass; Spandex; Nylon; HPPE